| 27 May 2005 05:35 pm |
Topsy Turvy Guest | 1 more in4mation like that from U, Fritzo might come in handy 4 others s well. Thank!!!!!!
| |
|
| 02 Jun 2005 03:11 pm |
Jared Guest | Let me try to explain this very clearly to everyone. I have been spending hours trying software to burn a dvd to dvd. First DVDXCOPY which worked ok somtimes, but after much searching and understanding, this process works everytime. First, you need two tools (They are both freeware): dvdshrink and dvddecrypter. When burning a dvd, run it in dvdshrink, just to make sure that it is within the size of your disk. To do this:
Open Shrink
Choose “Open”
Then select the drive from which the dvd to be burned is located.
Now click ok, and it will analyze it in about 10 minutes or less.
When done, click backup dvd.
Choose save to your hard disk as an .iso file to be burned in dvddecrypter.
When done saving, dvddecryptewr should automatically open in write mode. Insert a blank dvd into your burner drive and make sure that that drive is selected in the drop down menu.
Finished
Note: If dvddecrypter does not automatically open, do this to burn:
Open DVDdecrypter. ON the menu bar, choose Mode -ISO - Write.
Then click browse. Find the file where you saved the .iso from DVDSHrink. Then insert your blank disc, and burn!
And for the record, as if not common sense, if you already have the .iso file saved, you can just skip ahead to the part under “Note” to burn it to DVD.
AFter many hours of reading online ways, I have found that this is the easiest.
PS DVDdecryptor can read and burn the DVD, but it cannot shrink it.
PLease let me know any success you may have, and if I left anything out. Peace, Jared
| |
| 04 Jul 2005 12:52 pm |
Flash Guest | I’m a little confused. I thought the original question was how to burn an ISO to a DVD.
As the user said he has Nero, why wouldn’t you (in Nero), just click RECORDER - BURN IMAGE and point to the iso image?
Is there a quality or compatability issue I’m not aware of?
That’s the way I’ve always done it.
(and no, I don’t have Sith; haven’t seen any of the “newer” three SW flicks yet)(yes, i live in a cave, I know, I know 
Thanks for any response,
Flash
| |
| 06 Jul 2005 10:52 am |
Ottawa_Rudeboy Guest | i got a question for you cycber people out there. I am new to burning dvd and i just downloaded the movie blow. the file is over 7 gigs. is there anyway i can shrink it and burn it on a normal blank dvd that holds 4.something gigs
| |
| 07 Jul 2005 03:44 pm |
Eep Guest | I’m also confused - the question was how to convert the ISO to 16:9 widescreen, since the ISO file is incorrect. The file came with instructions to convert using DVD Shrink and DIVXtoDVD, but I keep getting timestamp discontinuity errors with DIVXtoDVD. This method was described as the only way to do the conversion without screwing up the sound.
So since DIVXtoDVD doens’t work - are there any other ideas? I’m not real clear if these other posts are in regards to the original post or a later one.
| |
| 13 Jul 2005 03:00 pm |
billy Guest | wot do i use 2 burn a 311kb iso game
| |
| 18 Jul 2005 02:55 am |
Chris dither Guest | I have dvd srink can save the fil, play on winDVD7 but not burn it.
(what is this dvd decryptor, how do i get it, i only have trail version of shrink)
Will nero six burn it?
Thanx Chris
| |
| 22 Jul 2005 03:24 am |
Kristina Guest | to burn an iso using nero....
open nero burning rom,
exit the wizard
select burn image from the menu above,
find your .iso,
and burn.
| |
| 07 Jul 2007 12:19 am |
Entree Rep: 0 Joined: 07 Jul 2007 Posts: 2 OFFLINE | Well I had the same problem how to run an IMG file or ISO files
very simple just the file extension IMG to ISO.
Install WinRar... and extract your ISO File....then you’ll see ur self the result....best of luck.
| |
| 07 Jul 2007 12:22 am |
Entree Rep: 0Joined: 07 Jul 2007 Posts: 2 OFFLINE | As i said before You dont' need to burn any file..dont' bother yourself do all that long process. just simply change the file extension IMG to ISO n extract it by WinRar by rightclicking on the file n chose extract here..... See ur result....
| |
| 10 Dec 2007 03:35 pm |
Tavalus Guest | Hi. I just burnt an ISO to a DVD to run on another computer, but when I put the DVD into the 2nd pc nothing happens. How do I run the dvd? Should it auto run? I used DVDSanta
| |
| 19 Dec 2007 09:05 pm |
DualBullseye25 Guest | hey i have a question involving all of this. I have a game that is in ISO and it says that i have to put it on a disk and then install it from the disk to my hard drive. how do i put it on the disk to make it run correctly.
| |
| 22 Dec 2007 03:59 am |
nannananananana Guest | alllllllllllllll of you are geeeees just buy a normal DVD movie dum
| |
| 15 Jun 2008 03:48 pm |
Alexsander Guest | i just downloaded a game as a torrent and i got 1 large iso disc and a small iso disc pop up .. i dont know how to get the game working because i tried to use magic disc and magic iso and i have no luck... i took the files from the iso and put them onto my computer i installed the game and when the play screen comes up i press it and it says please insert dvd rom into dvd tray or something like that.. i dont know if i need a crack.. i tried also mounting the first iso file the large one and the game starts but when i press play again the same dvd rom message pops up.. if anyone can plzz help thank you i been trying for hours.. the game is new but its the right game you can tell by the screen that comes up when it says play and install
| |
| 15 Jun 2008 05:14 pm |
Alexsander Guest | if anyone knows please help out
| |
|
|
|
Previous Page - Post Reply |
»
CD/DVD Writing
» How to burn an .ISO file to a DVD-Rom? Noob here..
< First Last ]
