| 20 Feb 2005 02:12 pm |
link Guest | everytime i run winiso and drag my files from the cd ...when i go to make it into a iso it says cannot read from sorce file...can anyone help me
| |
|
| 20 Feb 2005 11:30 pm |
Mountaingoat Guest | Foster247, once you use ISObuster to convert them into usable files, you don’t need to burn them. Look for the “setup.exe” or similar thing and intall it, your good to go.
| |
| 20 Feb 2005 11:38 pm |
Mountaingoat Guest | Oh, and one more thing Foster247, if your downloaded game came with a “Crack” folder or something similar, be sure to replace the ".exe” file that launches the game with the ".exe” in the “Crack” folder. Hope this helps.
| |
| 21 Feb 2005 10:02 pm |
h2hotshot Guest | hey i dled the rome total war bin files and installed everyting went right until the last file on the mdlsbu~1 thats currupt can some one pls send me this file through bearshare cause the one i got is corrupt.
| |
| 22 Feb 2005 09:20 am |
VASI Guest | I have a problem and i would apreciate it if someone would help me
I have the new Nascar Sim Racing game on 2 cd-s
I copy them into my PC, and after i extract the files, I have 4 new file: 1 .mdf, 1 .mds, 1.bin and 1.cue
i mounted the .mdf and the .bin file as rives, the installation starts, but after 33%, it goes to the end. It says that it is done, but the files from the second CD are not installed, so i cannot play the game
What should I do to make it work????
| |
| 23 Feb 2005 07:10 pm |
Manosaur Guest | OK PLEASE- PLEASE PLEASE PLEASE-
(Did I mention PLEASE?)
Here is the situation- I downloaded a torrent ps2 game (Yourself Fitness) I unrar’d the files- got the bin, mounted it have the .cue files-
All I wann do is play this on my console- yes I have the modchip installed.-
I have a mac (super drive all that) I have toast titanium
Step by step-(ooh baby) what do I do?
On my desktop I have a file containing two folders- cd1 and cd 2
each folder contains a.bin file and a .cue file-
What do I do now???
Thanks
| |
| 24 Feb 2005 10:49 pm |
imran Guest | hi,
I download cricket 2000 from net i burn cd and i can also install from it. but whn i run the game it said “Please insert the correct cd” plzzzzzzzz help.
| |
| 25 Feb 2005 09:11 pm |
Need Of Informatic Assistance Guest | I Downloaded a Game “Uefa Champions League” and there were 2 folders that said CD1 and CD2. Both have RaR files and other type of files that I dont know but they all say “rld-u25a”. When I extract all RaR files to a single folder, there appears 1 Bin and 1 Cue files. What should i do?? can anyone help me??
| |
| 25 Feb 2005 11:59 pm |
kbitkid Guest | hey ya’ll, ya’ll gotta read the posts we have here. a lot of ur questions are already aswered here.
| |
| 27 Feb 2005 01:02 am |
guest Guest | ive jus downloaded vice city and its a cue file ive tried the make cue file but i dont own a dos and magic iso dus nufin but make me sh**ier HELP!!!! majorly
| |
| 27 Feb 2005 09:30 pm |
Igor Guest | ok Iv had a long problem history so far.
Where do I start First I went and tried to burn the Bin/Cue files But Nero foun d problems with the first BIN file. so I kinda modified the the 2nd disc bin.cue (I modiied only the Cue file)
To look like
the second one looks like
FILE “MechWarrior_4_Mercenaries.CD2.DEVIANCE.ShareReactor.BIN” BINARY
TRACK 1 MODE1/2352
INDEX 1 00:00:00
and the first one looks like this
thisFILE “xxxxxxxxxxxblahxblahxxxxxxCD1.Bin” BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00
I went and have the curent first cd cue look like the second one.
Now that didnt work cos my cd’s came out Blank! like 4 of them! and I cant write on them any more.
Then I downloaded a program called ISObuster
And manualy TOOK the files and tried to write them onto the cd BUT
Somewhere in the proccess it tells me that there is some sort of error or something like that and it cannot write onto the disc Any more!
then gives me 3 or 4 options asking me do i want to delete, do i want to save for later attemp and last but not least Probobly try again Not shur about last one.
Anyway that step didnt work for a WHOLE 3 times, so thats 7 disks 3 of em Im not shur about.
Well I wasnt gona let the problem get to me so Got to these forums and somehow got to MagicISO downloaded it and Made an ISO file out of the disk1 file and I tried to burn that onto the cd.
Well that got me the furthest, it made sounds as if it where writing onto the cd 24x speed/lowered it from 32x
I went for a smoke, came back and hapily tried to open the cd to look at the writen files on it....
It started to read the disk BUT it crashed while it was reading the disk.. TRied it again Crashed on me!
tried it a 3rd time CRASHED!.
now I dont know what to do now...
can some one give me a foolproof way to just take care of this problem cos im breaking my balls over this here disk thing.
Im thinking the worst/itsa curupt file but it could be something that im doing wrong or not doing.
The files seem to check out ok when I extracted them onto my HD Opened a few of em/they all wrote to c:\ without a problem.
| |
| 02 Mar 2005 01:08 pm |
hak12288 Guest | i downloaded star wars knights of the old republic 2 ..and i used winrar to extract all of the bin and cue files. but when i used daemon tools to play mount the image and play the game, it says i didnt insert the correct cd. maybe its because i didnt do something with the nocd crack...but i dont know how to do that..can someone tell me how to use the nocd crack?
| |
| 03 Mar 2005 12:04 am |
Igor Guest | Look up a nocd crack for your game, then place the “VIRUS FREE” program into the INSTALLED directory and run the program, or if there is something difrent in the faq of the crack then do as it says, as long as you are shur that its not gona damage your comp in any way.
| |
| 04 Mar 2005 10:01 am |
AK Guest | Hi all! i’ve downloaded Sims 2 in the format of .iso files. There are CD1.iso, Cd2.iso, Cd3.iso and Cd4.iso. I used Isobuster to extract all the files and burned them out. After installing all these, I was asked to insert Cd1 when i want to play, but it just kept asking me to insert Cd1 even though the Cd1 was in there. I’ve read something about something about isobuster not extracting all the information in this forum. So can someone pls tell me what can i do now? I’ve also tried to burn the .iso files using Nero but i was not to install it.
I’ve installed MagicISO as some of you have recommended this program in this forum. Can i use that to burn .iso files and will i be able to play using the CD after that or i have to extract it first?
I’ve also downloaded the Sims 2 in another format which is .ccd, .img, .cue and .sub for each CD1,2,3 and 4. I don’t really know wat to do with it. I tried extracting them using Isobuster but whether i clicked on .ccd or .img or .cue, the files extracted were the same.
Can someone pls teach me how i can burn them into Cd and be able to play using it? Either way will be fine with me(using .iso files or .ccd, .cue files) Help appreciated!
| |
| 04 Mar 2005 02:38 pm |
kevin Guest | ok well i downloaded nfsu2 and battlefield vietnam, installed them, and then i am using daemon tools in order to run them
they are fully installed and all but every time i go to run the game all i get is a message that says to insert the cd
i dont know the problem and any feedback would be great
thanks, eric
| |
| 06 Mar 2005 04:46 pm |
i dont no Guest | were is everybody geting theses games online?
| |
| 07 Mar 2005 11:59 pm |
Jack Paredes Guest | the trouble with cod is because the label of the cds don’t match with the right label
CoD1 and CoD2
Thats all
regards
| |
| 09 Mar 2005 10:22 am |
MIke Boogie Guest | ok so I have COD but it’s not in a .bin format it just all the files. So I install cd1 works fine then it ask me for cd2 so I place it in and it does’t recognize the cd I think the files need to be in a folder and the name of the folder I don’t know I think that’s why it doesn’t recognize the cd. can someone tell me the names of the folders so cd1 can recognize cd2. I don’t have a bin or a .cue files so I can’t burn them like that. any help is very much appreciated..
| |
| 09 Mar 2005 11:02 am |
Mikey P Guest | i have got sum idea (a very little) with the BIN/CUE thing but lately i have repeatedly had the same problem. i mount the cue with Daemon tools then do a copy cds with nero. when i try to install the game it goes bad and says there is an error about 10% into the install.
has anyone got any ideas what is wrong
thanks
mikey
| |
| 13 Mar 2005 04:50 pm |
crz Guest | thx guys i now know how 2 do this shit thx
| |
|
|
Previous Page - Post Reply - Next Page |
»
CD/DVD Writing
» .bin and .cue files (again)
< First ... 5 6 7 8 9 10 11 ... Last > ]
