*.asf audio problems

right, just got a webcam that records in asf. At first I thought the microphone in it was broken cause the quality was so bad however then I tried it on another pc and the quality was near perfect- so there must be something wrong with my codecs- I have Klite. I’ve tried converting it to Avi/Xvid however the quality stayed the same and on the other pc this new avi didn’t improve in quality as the original did.

Playing the File in MPC, VLC and GOM yields the same result- the quality is very poor. On the laptop the quality is perfect.


I’ve then installed the newest Klite and now it has no sound and gives me this:


E:\Documents and Settings\Administrator\Desktop\Minoru 3D Webcam Video233.asf::Raw Audio 0

Media Type 0:
— — — — — — — — — — — — —
Audio: 0x000a 22050Hz mono 20Kbps

AM_MEDIA_TYPE:
majortype: MEDIATYPE_Audio {73647561-0000-0010-8000-00AA00389B71}
subtype: Unknown GUID Name {0000000A-0000-0010-8000-00AA00389B71}
formattype: FORMAT_WaveFormatEx {05589F81-C356-11CE-BF01-00AA0055595A}
bFixedSizeSamples: 1
bTemporalCompression: 0
lSampleSize: 1088
cbFormat: 64

WAVEFORMATEX:
wFormatTag: 0x000a
nChannels: 1
nSamplesPerSec: 22050
nAvgBytesPerSec: 2500
nBlockAlign: 1088
wBitsPerSample: 16
cbSize: 46 (extra bytes)

pbFormat:
0000: 0a 00 01 00 22 56 00 00 c4 09 00 00 40 04 10 00 ....“V..Д...@...
0010: 2e 00|10 00 04 00 00 00 00 00 00 00 00 00 00 00 ................
0020: 10 00 00 00 05 fa 9a 00 05 c9 2d 48 80 5a 60 00 .....ъљ..Й-HЂZ`.
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................


please help!!!

ok after some searching I came across a thread with a similar issue, the guy said he fixed it by downloading the
VoxWare MetaSound Audio Codec 1.6.0.17

here:
http://www.softpedia.com/progDownload/VoxWare-MetaSound-Audio-Codec-Download-14459.html

I’ve downnloaded it but WHERE DO I PUT IT? thanks

ok I figured out I have to right click the inf file and click install but that didn’t solve the problems. then found this:




"
This usually means that there is a filter missing that is needed to decode one of the streams in the file. The error message should show some information about the required format, but this information is very cryptic. Below you can find some of the values that the error might show you, together with the format that belongs to it."

majortype: MEDIATYPE_Audio {73647561-0000-0010-8000-00AA00389B71}
subtype: Unknown GUID Name {726D6173-0000-0010-8000-00AA00389B71}
formattype: FORMAT_WaveFormatEx {05589F81-C356-11CE-BF01-00AA0055595A}

“The format above is AMR audio. To play this you need to enable AMR in ffdshow audio decoder."




-ok, I’ve enabled AMR audio, but how do I now make the MPC use ffdShow- when I run it I still get the same mistake- how do I enable FFdShow in the MPC- so that there are the 2 red and blue squares on the taskbar you click em and get all the options and stuff?